Duck
New Member
Posts: 27
|
Post by Duck on May 29, 2002 15:34:51 GMT -5
|
|
|
Post by Jbirk on Jun 1, 2002 3:17:48 GMT -5
Well, it really wouldn't be to hard to save and read cards to and from an appvar. Just represent each card by a byte that way you can have 255 different cards!
Basically you just look up the appvar and in the symtable, select a byte and load it like you would a ram address
e.g.
ld a,203 ld (hl),a
loads card number 203 into appvar assuming that hl points to the address of the correct byte in the appvar.
|
|
Duck
New Member
Posts: 27
|
Post by Duck on Jun 2, 2002 19:29:58 GMT -5
the only problem is that I have no asm programing experience. I was wondering if anybody would do it.
|
|